Mode 1: Classic Lead
The classic lead mode is three-dimensional and open sounding with super tight bass response and very pronounced mids. The gainsettings starts at very warm clean sounds. Compared to the 60's plexi amps, the higher gain settings sound more beefed up and fat with very musical smooth highs. This mode is very usefull for open chords and classic solo work.

Mode 2: BLACK ROSE
Based on channel 2 of our acclaimed BLACK ROSE amplifier. Before nine o’clock you’ll find some incredibly cool crunchy 60’s sounds. Turning up the gain knob a little further the sound will effortlessly change into an amazing compressed 80’s style crunch. When you turn beyond two o’clock you’ll be entering ‘overdrive territory’. The overdrive sounds are harmonically rich, full and fat, yet tasteful, organical, smooth and musical. The sound of mode 2 is characterized by natural compression, super tight bass (no mud!), tasty harmonics and unparalleled sustain. Whatever gain setting you'll choose, it will always give a killer sound that cuts through the mix with ease.

In addition, both modes respond excellent to the volume-pot of your guitar. The two modes are balanced in both tone and volume. Switching between them with the footswitch always makes perfect sense no matter what gainsetting you'll choose.

SVC -Seamless Volume Control- Tube amp volume under control...
The Super7 has gain and master volume controls to control gain, volume and the overal feel of the amp. In the SVC power section you’ll find an extra ‘total’ volume control. It enables the amp to produce 0,1 Watt bedroom levels yet retaining great tone. That is without thinning up the tone nor destroying the sustain. From now on the power-soak is a thing of the past!

Main Features:

• 1 channel with 2 voicings: 'Classic Lead' and 'BLACK ROSE'
• SVC - Seamless Volume Control: from 0,1 watt 'bed room' levels to 50 watt 'Rock Arena' levels (no tone loss at lower volumes, no need for power-soak)
• Ultra wide gain range control for ultimate gain versatility
• True bypass effects loop
• Send-level-knob to attenuate or boost effects loop
• Solo boost (mode 1 and mode 2)
• 3 button footswitch (mode 1/mode 2, effects loop-on/true_bypass, SoloBoost on/off)
• Outputs 4, 8, 16 Ohm or 2x16, 2x8 Ohm
  

  Specification:

• Output: 50 Watts R.M.S.
• 7 tubes : 2xEL34 power tubes / 5xpre-amp tubes: 4x12AX7 + 1x12AU7(effects loop)
• Outputs 4, 8, 16 Ohm or 2x16, 2x8 Ohm
• Weight: approx. 16 kg
• Handsoldered printed circuit board in the Netherlands by Kool & Elfring
  
  

  Finish & Construction:

• Handmade A to Z bij Kool & Elfring
• dimensions: H=25 cm W=50 cm D=25 cm
• 9 ply lightplex
• Full dovetail wood joints
• Asymetrical handle for perfect balance
• High quality vinyl covering
• Nickel plated corners
• Tolex: 'Black Rose'