The Custom Reverb Signature is the culmination of everything Bill & Joe have learned since day one. It has a lot of the same features from their early days building amplifiers. The CR Sig has a very refined lead channel that has been tweaked to perfection. Originating in the K&M Custom, this circuit is the most open, least compressed and most articulate and revealing. The Signature also features a dual mode power supply which allows for either 35 watt or 50 watt operation(70/100 watts in the 100 watt version). It has a separate isolated power supply for the reverb, which enhances the reverb effect and prevents loading of the dry signal. In conjunction with our other reverb innovations, you'll immediately notice a rounder, warmer, less restrictive feel.

The version 2 of the Custom Reverb Signature features further refinements. More proprietary components have been added to the list of parts made exclusively for us to continually improve our amps. The presence control has been eliminated and a contour control has been added. At the twelve o’clock position, the amp’s frequency response is flat. Rotating the knob counter-clockwise, will decrease the highs and increase the lows, and vice-versa for clockwise movement. This is ideal for switching between single coils and humbuckers without touching other controls or compensating for different speaker cabinets. It’s also a great way to compensate for room acoustics without changing your entire preamp EQ.

The effects return level is now internally fixed and there is a reverb send control on the back, similar to the Overdrive Signature. The beauty of this is you can control the amount of signal that goes to the reverb tank, allowing you to go from short to long decay times. The return control(front panel) adds just the right amount of total effect, from subtle to surf.

Finally, the output transformer has also been redesigned. The Custom Reverb Signature V2 has a much wider bandwidth, which along with our refined circuitry and component choices, translates into more articulation, feel, chime, and musicality than ever before.

Quick Facts:

2 channel, cascading, SS Rectifier, 2 X 6L6, 50 watts or 4 X 6L6, 100 watts.
4, 8, 16 ohm output, treble, middle, bass, bright, mid, deep, dual EQ settings, boost, gain and master each channel, contour control.
Dual function LED footswitch for clean/lead and tone bypass.
Accutronics all tube spring reverb with send and return controls.
Buffered effects loop.
Special design transformers, individually selected components, each amp signed by Bill Krinard and Joe Mloganoski personally.
Dimensions: 20" L x 10" D x 12" H / Weight: 41 Lbs for 50 watt and 49 Lbs for 100 watt.
Price: $5500 approx.€4215 at 50watts / $6000 approx.€4600 at 100watts. Standard cabinet is black tolex. Custom covering available at additional cost.